HIGH EFFICIENCY TOOL ®
15504 Middle Road, Meadville, PA 16335 800-724-1799 • hamtool@windstream.net

 WE CUT THE HARD STUFF

  HOME     DRILLS     MILLING     TREPANNING     CUTTERS  

Jet-Stream Drills

Internal Chip Exhaust Coolant Induced

Throw-Away Insert Design

Note: BTA Thread And Other Special Shanks Available Upon Request.

  A
Diameter
Range 		B C
Diameter 		D  
  1.930 to 2.162 -12 1.535 5.00  
  2.166 to 2.398 -13 1.693 5.00  
  2.402 to 2.634 -14 1.693 5.00  
  2.638 to 2.870 -15 1.875 5.50  
  2.874 to 3.146 -16 2.062 5.50  
  3.150 to 3.421 -17 2.312 5.50  
  3.425 to 3.933 -18 2.562 5.50  
  3.937 to 4.406 -19 3.062 6.00  
  4.409 to 4.878 -20 3.531 6.00  
  8.882 to 5.350 -21 3.592 6.00  
  5.354 to 5.824 -22 4.062 6.00  
  5.827 to 6.295 -23 4.531 6.00  
  6.299 to 6.768 -24 5.000 8.00  
  6.772 to 7.240 -25 5.500 8.00  
  7.244 to 7.712 -26 5.968 8.00  
  7.717 to 8.185 -27 6.437 8.50  
  8.189 to 8.657 -28 6.906 8.50  
  8.661 to 9.130 -29 7.375 8.50  
  9.134 to 9.602 -30 7.843 8.50  
  9.606 to 10.075 -31 8.321 10.00  
  10.079 to 10.547 -32 8.781 15.00  
  10.551 to 11.020 -33 9.250 15.00  
  11.024 to 11.492 -34 9.750 15.00  
  11.496 to 11.964 -35 10.218 15.00  
  11.968 to 12.437 -36 10.687 15.75  
  12.441 to 12.909 -37 11.156 16.12  
           

ALL Jet-Stream Drills Feature Positive Chip Control With Plate Type Chipbreakers.

All Jet-Stream Drills Are Available In A Single or Double Tube Design

All Jet-Stream Drills Feature Standard Positive Rake Square Inserts And Positive Axial And Positive Radial Rake.

800-724-1799 • (814) 724-5393 • Fax (814) 337-0651 • Email: hamtool@windstream.net

15504 Middle Road • Meadville, PA 16335